We – EPG Team the most significant worm gearbox, couplings and gears manufacturing facility in China with 5 distinct branches. For a lot more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828 /
Comprehensive metal drum manufacturing line
I. Raw resources consumption/creation ability
| Plate thickness (mm) | Finihed drums (pcs/T) | Production capability (kg/personal computer) | |
| 1.two | 41 | 21.five | |
| 1.0B | Up and bottom covers 1.two | 47 | 19 |
| Drum physique 1. | |||
| 1. | 50 | 18 | |
| 0.9B | Up and base addresses 1. | 54 | 16.eight |
| Drum entire body .nine | |||
| 0.nine | 56 | sixteen.2 | |
| .8 | ninety seven | ten.28 | |
II. Full steel drum manufacturing facilities
A. Entrance segment tools
1. Decolier
two. Hydraulic Up-coiling gadget
3. Hydraulic supporter
4. Side deviation rectifying unit
5. Sizing & flattening equipment
six. Reducing device – for drum human body
seven. Slicing device – for squander sheet
8. Arch form guiding system
9. Stac ept car
10. Hydraulic technique
eleven. Electric management method
twelve. Leading & Base cover conveyor device
1.Hydraulic Up-Coiling Device
a) Up-Coiling Support System is for storing steel coil and facillitate Content Feed Trolley for offering material.
b) Material Feed Trolley is employed for have steel coil.. It is operated with hydraulic technique to push cylinder for
reciprocating linear movement and equipment box to supply metal coil in parallel to the center of uncoiling unit so as to
assure the correcting.
2.Decoiler & Hydraulic Supporter
a)Uncoiling width: 916-1320mm
b)Plate thickness: .6-1.2mm
c)Motor power: 5.0KW
d)Uncoiler potential: 10t
e)Inside diameter: ¢470-520mm, Outdoors diameter: ≤¢1200
f)Machine measurement: 3900x1500x1940(mm), Whole fat: 5T
3.Sizing &Flattening Machine
Short introduction:7 rollers functioning,servo computerized sizing,worm and gear change the leveled plate thickness.
Perform:The clearances of up and down rollers can be adjusted by the higher hand-wheel whilst figure can be proven by dial indicator. The operation linear speed is adjusted step-much less. It can be controlled by the signal of mid-bridge for high and low speed change.
Principal technics:
a)Plate width: 916-1320(mm)
b)Plate thickness:.6-1.2(mm)
four. Cutting Equipment
Function: Reduce the leveled metal plate into drum human body.
Main technics:
a)Plate width:≤1500mm
b)Plate thickness:≤3mm
c)Motor power: 3.0KW
d)Reducing potential:≤20 times/min
e)Device dimensions:1800x950x1500(mm),Complete bodyweight: 3T
5.Hydraulic Station
Perform:Give oil for the oil cylinder of decoiler, lifting device,uncoiling supporter,and overturn machine to make confident stably doing work.
Major technics:
a)Motor energy:7.5KW
b)Equipment size:800x800x1500(mm),Complete bodyweight: .5T
six.Electrical Control Program
Purpose: Management the decoiler,flattening machine and other front segment equipments operating.
B. Go over products
1. Top & Base protect mould
2. Double loc ept mould
three. 63T urgent machine
4. 160T urgent machine
5. Pre-coiling & Gluing machine
one. Top & Bottom cover mould
Brief introduction:Outfitted with two sets of 160T pressing devices
Operate: Punching the base protect
Primary technics:
a)Motor power:eighteen.5KW
b)Wor ept capacity:5-26 pcs/min
c)Machine size:2185x1420x3070(mm),Overall excess weight: 14.5T
2.Drum Injection Mould
Quick introduction: Geared up with a single set of 63T pressing machine
Double punching mould: punch oil filler and breathable mouth of the base include.
Device dimensions: 710x480x300(mm)
Total weight: .5T
Double loc ept mould: lock oil filler and breathable mouth of the base cover.
Device dimension: 710x480x300(mm)
Total bodyweight: .5T
Main technics:
a)Motor electrical power: 11KW
b)Device size :1800x1232x2550(mm)
c)Complete bodyweight: 5.5T
3.Pre-Coiling & Gluing Equipment
Quick introduction: Pre-coiling device for the bottom cover, cylinder thrust the cam to operate, computerized glue- spaying method.It has advantages of protection,stablity, sleek edging.
Main technics:
a)Machine dimension:1600x1400x1350(mm)
b)Whole excess weight: 4.5T
C. Middle part equipment
one. Stac ept desk
2. Circle-rolling equipment
3. Seam welding device
four. Edging & Beading device
5. Corrugation (W Rib) machine
six. Edge-curling device
seven. Convey gadget
eight. Electrical control technique
nine. Leakage chec ept machine
one.Circle-rolling Machine
Brief introduction:3 rollers doing work.
Primary technics:
a)Rolled plated width:≤1100mm
b)Plate thickness:.6-1.2(mm)
c)Circle diameter:≤570mm
d)Motor power:1.5KW
e)Machine dimensions:2200x750x1300(mm),Overall bodyweight: 1.5T
two.Seaming Machine(BH-one hundred fifty-5Z)
Limited instruction:This automated seaming device dismisses the location welding procedure,it is our newly developed drum seaming equipment.All of components adopts domestic excellent uncooked substance,cupreous welding rollers.
Main technics:
a)Welding Device potential:150KVA
b)Driving kind: pneumatic
c)Existing: alternating current
d)Frequency assortment: substantial frequency
e)Wor ept concept : contravariant
three.Edging&Beading Equipment
Limited introduction:controlled by PLC,hydraulic drive
Major technics:
a)Beading peak:≤14mm
b)Drum peak:894-905(mm)
c)Hydraulic method pressure:8Mpa
d)Air pressure:.1Mpa
e)Machine measurement:3700x700x1600(mm),Overall weight: 5T
Hydraulic Station:
Major technics:
a) Equipment measurement: 1800x860x1700 (mm)
b) Total fat: 1T
c) Motor power: 22KW
4.Corrugation (W rib) Device
Quick introduction:controlled by PLC,hydraulic travel
Primary technics:
a)Corrugating peak:≤3mm
b)W rib height:≤9mm
c)Drum peak:884-895(mm)
d)W rib space:280mm
e)Motor electricity:11KW
f)Device dimension:4500x650x2100(mm),Whole excess weight: 7T
Hydraulic station:
a)Equipment dimensions:1800x860x1700(mm)
b)Complete excess weight: 1T
c)Motor electricity: 7.5KW
five.Edge-Curling Equipment
Limited introduction:managed by PLC,hydraulic generate,7 levels edge curling.
Main technics:
a)Drum top:886-897(mm)
b)Motor energy:45KW
c)Device size:4800x1300x2200(mm),Total weight: 13T
Hydraulic station:
a)Machine dimension:1800x860x1700(mm)
b)Complete weight: 1T
c)Motor electrical power: 7.5KW
six. Leakage Chec ept Device
Brief introduction:Manual/computerized management,pneuma lock.
Major technics:
a)Chec ept drum diameter:560-570(mm)
b)Drum peak:886-897(mm)
c)Strain:.03Mpa
d) Machine dimension:2530x700x1100(mm),Whole weight: 2T
7.Multi-section Convey Device
Short introduction:Convey the drum body to be edged,beaded,Corrugated W rib bolstered and sealed base go over with PLC managing.
Major technics:
a) Motor power:4.0KW
b) Machine measurement:11000x2100x1000(mm)
c) Complete weight: 3T
D. Rear section equipment
1. Entrance segment trans-line
2. Degreasing & Phosphorization room
three. Washing & Drying place
four. Overturn products
5. Painting room
6. Entrance drum-separation equipment
seven. Drying space after portray
8. Bck drum separation device
nine. Air cooling method
ten. Rear segment trans-line
eleven. Electric powered management technique
one. Degreasing & Phosphorization Area
Limited introduction: This element is utilized to transportation the drums,controlled by PLC, adopts spraying gadget to automated thoroughly clean the coil, phosphorize and washing the grease on the drums. The conveyor system adopts outstanding steel, inwalls are created of 1mm metal plate.
Principal technics:
a)Device size:36000x2110x2060(mm)
b)Overall fat: 30T
two. Washing & Drying Space
Quick introduction:Drying the drinking water on the area of the drum, managed by PLC.The entire machine adopts fuel heating gadgets.Enthusiast is installed on the prime of the room, so that sizzling and cycling wind can be produced to speed up the drying.
Major technics:
a) Motor electrical power:25KW
b) Equipment size:20000x1920x3600(mm)
c) Overall weight: 25T
3.Painting Place(double hues)
Purpose: The conveyor system is controlled by PLC, rotating table make the drums intently, painting program paint the drums in & outdoors with the spray gun. One colour or a variety of can be different. Method of water-curtain spraying dispels spraying smoke.Nozzle adopts Nordson Brand name, Portray equipment is produced of Chang Jiang.
Principal technics:
a) Motor electricity: 55KW
b) Machine dimension: 7400x4990x3600(mm)
c) Total excess weight: 15T
4.Entrance Drum Distributor
Perform: Transportation the drums to the conveyor line of outside the house painting&stiffening area, the cylinder is controlled by PLC.
Primary technics:
a) Motor electricity: 2.0KW
b) Device size: 1500x1050x800(mm)
c) Overall excess weight: 1T
five.Drying Line after Painting
Function: The conveyor system is managed by PLC, adopts fuel heating inwall of the room is geared up with heating tubes. Fan is set up on the prime of the place, so that dry the paint.
Principal technics:
a) Motor electrical power: 35KW
b) Device size: 36000x2100x4300(mm)
c) Overall weight: 30T
six.Down-drum Roller Trans-line
Function: The system transports the dried drums to the floor.
Primary technics:
a) Motor energy: 1.5KW
b) Machine dimensions:2000x900x800(mm)
c) Total bodyweight: .3T
7.Overturn Equipment
Operate: Change the point out of drums from horizontal to vertical, so that it will be much easier to paint, controlled by Cylinder.
Primary technics:
a) Equipment size: 1400x690x850(mm)
b) Complete weight: .5T
/ The use of unique tools manufacturer’s (OEM) part quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our business and the shown substitute areas contained herein are not sponsored, accredited, or made by the OEM. /
